3
3.0
Mar 25, 2021
03/21
by
cihan incebel (cihanin)
data
eye 3
favorite 0
comment 0
Coaster holder for 98mm square coasters
Topics: stl, coaster_holder, Decor, thingiverse
9
9.0
Apr 27, 2021
04/21
by
Matt Chilver (Diplomatti)
data
eye 9
favorite 0
comment 0
This is a coaster holder i made for the Gear Coaster found here : http://www.thingiverse.com/thing:10014 I thought that the supplied coaster holder was too wasteful on filament and wasn't good for picking them up without coasters falling out. The Holder fits 4 coasters.
Topics: coaster_holder, stl, thingiverse, Household
9
9.0
Jan 18, 2021
01/21
by
Gina Manchul (gm91)
data
eye 9
favorite 0
comment 0
Coaster holder with basic 3D printer design engraved on the sides. Designed to hold some 110X110 mm coasters. Smaller 100X100mm is also available.
Topics: thingiverse, Household, coaster_holder, coaster, stl
8
8.0
Jan 19, 2021
01/21
by
Chase Moore (Clonearmior)
data
eye 8
favorite 0
comment 0
Coasters Link: https://www.thingiverse.com/thing:718113 Can Hold all the coasters and be printed out on a 150x150x150mm printer.
Topics: stl, thingiverse, Containers, coaster_holder, EPCOT
4
4.0
Apr 16, 2021
04/21
by
3D Arts Inc. (3DArts_ca)
data
eye 4
favorite 0
comment 0
This thing was made and design by one of designer from 3D Arts Inc.
Topics: coaster_holder, thingiverse, 3D Printing, stl
9
9.0
Jan 19, 2021
01/21
by
Kevin Toppenberg (kdtop3)
data
eye 9
favorite 0
comment 0
My design was inspired by this (https://www.thingiverse.com/thing:242967) design. I wanted to be able to modify the number of coasters etc, so I remodeled in OpenScad. I wanted to have cut-outs on the end, but OpenScad balked and wouldn't render properly. So I exported to STL, imported into Blender, and then subtracted the stars from the end.
Topics: openscad, thingiverse, Household, coaster_holder, stl
4
4.0
Mar 22, 2021
03/21
by
Dennis B. (Cfire)
data
eye 4
favorite 0
comment 0
This is a holder for "Infill coasters by jmdbcool".
Topics: Holder, stl, Household, coaster, thingiverse, coaster_holder
3
3.0
Jun 12, 2021
06/21
by
Damon Estes (DamonEstes)
data
eye 3
favorite 0
comment 0
NO supports, 20% infill Coasters fit 3.5in cork blanks from Amazon
Topics: Decor, drink_coaster, coaster holder, thingiverse, coaster, stl
2
2.0
Dec 14, 2021
12/21
by
Andy (sora1984)
data
eye 2
favorite 0
comment 0
Just a simple Drinks Coaster set, It's designed to hold 10 coasters.
Topics: Household, stl, coaster_holder, thingiverse, coaster, Drinks_coaster
4
4.0
Mar 15, 2021
03/21
by
Maik Manke (R3DPrintDE)
data
eye 4
favorite 0
comment 0
This is a coaster holder for square coasters (9,5mm x 9,5mm). With a height of 4mm you can easily stack 10 coasters.
Topics: coaster holder, Kitchen & Dining, thingiverse, stl, coaster
2
2.0
Nov 30, 2021
11/21
by
Amit Dave (Amd3)
data
eye 2
favorite 0
comment 0
I printed jhoarty's Crypto Coasters (https://www.thingiverse.com/thing:2876513), and they are awesome! I thought the holder could be a bit more fun. So I designed this as a compliment. The one i printed I left more room in and the coins jiggle a bit, so i did one smaller but didn't print it so can't guarantee a fit. I had a multi-color filament "Rainbow Gradient" from CC3D (purchased on Amazon). Did this at 205c .12. All in was about at 15hr print.
Topics: coaster, thingiverse, cryptocurrency, stl, coaster_holder, cryptocoin, Containers
8
8.0
Jan 17, 2021
01/21
by
Mathias Steenstrup (Steenstrup)
data
eye 8
favorite 0
comment 0
Coaster holder made for ikea's AVSKILD coasters.
Topics: thingiverse, glass, coaster_holder, coaster, Kitchen & Dining, stl
4
4.0
May 1, 2021
05/21
by
Ingvarr Sidorov (SID_LOVE)
data
eye 4
favorite 0
comment 0
I took the pattern, reshaped it and added a coaster holder. Easy to print! My printer Anet et4 pro took 8 hours to print on 50mm speed :) Support from the table only, no support required for the pattern.
Topics: stl, napkin_holder, Kitchen & Dining, coaster_holder, thingiverse
5
5.0
Mar 25, 2021
03/21
by
Brett D Darr (bdiesel)
data
eye 5
favorite 0
comment 0
Multi-Color print of coaster holder using ThunderCats title logo in base. Designed to hold four (4) coasters with cork attached to each. https://www.thingiverse.com/thing:3865027
Topics: stl, coaster_holder, thundercats, thingiverse, coaster, 3D Printing
11
11
Jan 18, 2021
01/21
by
Marko Adjin (Marko21)
data
eye 11
favorite 0
comment 0
This holder holds 90mm by 90mm square mug coasters with rounded corners.
Topics: drink_coaster, thingiverse, Household, coaster_holder, coaster, stl
8
8.0
Jun 20, 2021
06/21
by
Ryan Jones (ThePresident)
data
eye 8
favorite 0
comment 0
Coaster holder with crop signal like design on bottom, with curved holes on the sides.
Topics: drink_coaster, thingiverse, stl, Decor, coaster holder, coaster
3
3.0
Jan 8, 2021
01/21
by
Tobsen LN (Tobsen3dprint)
data
eye 3
favorite 0
comment 0
HDD Coaster Holder
Topics: hard_drive, stl, hdd, Household, coaster_holder, coaster, thingiverse
3
3.0
Jan 7, 2021
01/21
by
David Shearer (DPS_Design)
data
eye 3
favorite 0
comment 0
I have a thing for making drink coasters - so here are four coaster holders. Coaster Holder 1.stl is grey in pictures Coaster Holder 2.stl is green in pictures Coaster Holder 3.stl is red and in pictures Coaster Caddy Horizontal 14.stl is blue in pictures. Each one holds 6 of my 100mm x 12mm coasters, except #4 - it holds 14 on end.
Topics: stl, coaster_holder, Kitchen & Dining, thingiverse, Coaster_Caddy
3
3.0
Mar 31, 2021
03/21
by
Chad Hill (Achiii)
data
eye 3
favorite 0
comment 0
This is a coaster holder for a set of 8 Shutterfly photo coasters. This was made by playing with the Sculpting Environment in F360. Instead of a flat bottom, it has a curved bottom that will require supports and may not print well.
Topics: Shutterfly_coaster, coaster_holder, Shutterfly, thingiverse, Household, stl
4
4.0
Mar 20, 2021
03/21
by
Jeremy Rans (kaldonis)
data
eye 4
favorite 0
comment 0
Designed for **1/8" thick material**. Will hold six 100mm diameter 3mm thick coasters. Should be easily alterable for different coaster sizes.
Topics: lasercut, Kitchen & Dining, stl, coaster, coasters, thingiverse, coaster_holder
6
6.0
Apr 19, 2021
04/21
by
Jason DaBold (jasondabold)
data
eye 6
favorite 0
comment 0
Hello :) I'm lucky enough to have received coasters from https://offermanwoodshop.com/ as a gift. I looked through some Google images and was able to quickly create a holder using OnShape. https://cad.onshape.com/documents/64f96ebd49a865bb4b5b0c36/w/6fa7c3034ef7b45576b250bb/e/512438c138f211022e4a1f1c I know that it is simple but I'm still a little proud of how quickly I was able to mock this up and print it. It's little successes like this one that give me patience for the more complicated...
Topics: thingiverse, stl, Household Supplies, coaster_holder, offerman_wood_shop
2
2.0
Dec 13, 2021
12/21
by
Andy (sora1984)
data
eye 2
favorite 0
comment 0
Just a simple coaster holder and coaster, the holder will store 10 coasters.
Topics: Household Supplies, stl, coaster_holder, thingiverse, coasters, drink_coaster
3
3.0
Oct 15, 2021
10/21
by
Jeff Kunzelman (CosmicProphet)
data
eye 3
favorite 0
comment 0
All kinds of yin-yang cats everywhere... I wanted a simple coaster set and coaster holder that matched. There was lots of inspiration on Etsy and Thingiverse, but nothing that met my needs. Designed to work with 4" coasters from Amazon, this will hold 6 Coasters and has the Yin-Yang design (same as are laser engraved on the coasters) in the base. Thank you to Aquaboy1987 and 3dpoplauki for the inspiration.
Topics: Kitchen & Dining, thingiverse, stl, coaster_holder, drink_coaster, cat
3
3.0
Jan 6, 2021
01/21
by
Thomas Vasquez (MrVasquez96)
data
eye 3
favorite 0
comment 0
Coaster holder designed to fit The perfect coaster AKA 'Perfster' by magonegro, https://www.thingiverse.com/thing:976069. I printed with support to get the best results, but it is not necessary to have it.
Topics: 3D Printing, drink_coaster, stl, coaster_holder, coaster, thingiverse
3
3.0
Jan 20, 2021
01/21
by
Alexander Olofsson (ananace)
data
eye 3
favorite 0
comment 0
Made to hold around 4-10 coasterboard beer coasters, round or square, sized in the range of 9-11cm. (American standard of 3.4" / 4") It fits both the common European- and American-size lightweight coasters, and can also hold mediumweight as well as heavyweight coasters, though only around 6 in that case.
Topics: beer_coaster, thingiverse, coaster_holder, coaster, Kitchen & Dining, stl
4
4.0
Jan 4, 2021
01/21
by
Derf Jam (derfjam)
data
eye 4
favorite 0
comment 0
This is to hold all the beer coasters I've collected from visiting breweries around town. The coaster size is your standard 4" ones.
Topics: coaster holder, stl, beverage_coaster, Kitchen & Dining, coaster, thingiverse
4
4.0
Mar 16, 2021
03/21
by
Jared DeGraw (Slicercrush)
data
eye 4
favorite 0
comment 0
A basic coaster holder I made a while back to hold the coasters I was designing. Holds about 3-4 of my prints.
Topics: thingiverse, beverage_coaster, coaster_holder, stl, coaster, drink_coaster, Containers
4
4.0
Apr 2, 2021
04/21
by
B. Nase (bn3dee)
data
eye 4
favorite 0
comment 0
What is better than a cold beer ? A cold beer with a coster below is better than having wet circles on the table - at least my wife says so, dunno where she get this ;-) So here is a customizable coaster generator with optional text on it, or a simple circle design and a customizable coaster holder for them to stack. The uploaded files are generated with a thickness of 3mm and a diameter of 100mm. But feel free to generate what ever you like.
Topics: coasters, coaster_holder, thingiverse, Kitchen & Dining, cusomizable, stl, coaster
6
6.0
Mar 5, 2021
03/21
by
Nope Nope (Antspy)
data
eye 6
favorite 0
comment 0
Simple coaster holders, one rather neutral and the other with cat paw prints. They fit 10x10cm coasters from 5-10mm height, so they'll fit from about 10 to 6 coasters, depending on height.
Topics: stl, Coaster Holder, Untersetzerhalter, Kitchen & Dining, Untersetzer, Paw, thingiverse
3
3.0
Mar 25, 2021
03/21
by
Miles Odonnol (MilesFromNeihu)
data
eye 3
favorite 0
comment 0
This is a reduced-material, rubber-band-based coaster holder designed to hold the splendid [Infill Coasters](https://www.thingiverse.com/thing:3027141) by imdbcool. Hooks on 3 levels mean holder capacity is adjustable. When "full" it holds 8 coasters. I'm pretty sure it could hold 9, maybe more; the rubber bands should stretch across the top when overfilled.
Topics: stl, coaster_holder, thingiverse, coaster, Kitchen & Dining, drink_coaster
4
4.0
Apr 16, 2021
04/21
by
Lorren Loveless (chiefrentageek)
data
eye 4
favorite 0
comment 0
I designed a baseball diamond to hold 4 - 90/91 mm coasters (with cork board bases). Similar to http://www.thingiverse.com/thing:822372. Thanks to http://www.thingiverse.com/spondoro/about for the inspiration.
Topics: coaster_holder, Other, coasters, thingiverse, stl, coaster_holderl, coaster
4
4.0
Mar 19, 2021
03/21
by
Sabine T. (Entilein)
data
eye 4
favorite 0
comment 0
Here are some coasters I made for the brewery of my friend. And a holder to keep them together. One holder has holes in the pillars to put a metal tack (4mm) in it - for stabilisation. Diese Untersetzer habe ich für die Brauerei meines Freundes entworfen. Und den passenden Halter gleich dazu. Einen Halter habe ich mit Löchern in den Fingern versehen um einen 4mm Stift einzukleben. Soll das Abbrechen der doch recht dünnen Finger verhindern. Of course no support necessary.
Topics: stl, Untersetzer, thingiverse, Kitchen & Dining, Glasuntersetzer, coaster, Bierdeckel,...
4
4.0
Mar 22, 2021
03/21
by
adam scott (commanderkeen)
data
eye 4
favorite 0
comment 0
This is a coaster holder for those vinyl coasters - I saw this (https://www.thingiverse.com/thing:244201) one night and wondered where the file was... It's 110mm internal diameter so there's a bit of space - feel free to scale up or down if you so desire!
Topics: Kitchen & Dining, stl, coaster, drink_coaster, useful, thingiverse, coaster_holder
6
6.0
Mar 3, 2021
03/21
by
Oscar Eriksson (Trixigt)
data
eye 6
favorite 0
comment 0
Made this for a friend for his birthday. Hope both you and he will like it!
Topics: coaster, holder, Kitchen & Dining, thingiverse, coaster_holder, stl, drink_coaster
0
0.0
Aug 13, 2022
08/22
by
Robert Smith (sirprintsalot8)
data
eye 0
favorite 0
comment 0
This is a blank coaster stand. It will fit any of my round coaster designs (as long as they have not changed). I have not test printed it.
Topics: coaster_holder, beverage_coaster, drink_coaster, Decor, stl, thingiverse, coaster
6
6.0
Jan 21, 2021
01/21
by
Damian Stefanski (fezz)
data
eye 6
favorite 0
comment 0
Simple coaster holder with Galactic Empire emblem. Fits 10cm coasters of a total height of 45-50mm, e.g. 12 pieces of IKEA AVSKILD.
Topics: empire, empire_emblem, thingiverse, starwars, coaster_holder, Kitchen & Dining, costerholder,...
3
3.0
Jan 19, 2022
01/22
by
Egoitz Collado (ECollado93)
data
eye 3
favorite 0
comment 0
Just a simple holder for another user´s coaster model. Inspired in this coaster: https://www.thingiverse.com/thing:1470838
Topics: holder, drink_coaster, coaster_holder, thingiverse, stl, coaster, Tesla, Kitchen & Dining
3
3.0
Mar 20, 2021
03/21
by
Valeriy V (I_never_asked_to_print_this)
data
eye 3
favorite 0
comment 0
Coaster dispenser for underdesk installation. Designed for coaster of 100 mm in diameter of ~2 mm thickness. Would hold up to ~10 coasters. My coasters are made of thick cardboard and have slightly different thickness so I had to make larger openings in the design. You can put coasters in the upper slot and take a coaster from the lower gap. 3×3mm screws are required for installation.
Topics: coasters, dispenser, underdesk, stl, thingiverse, Organization, coaster, holder, coaster_holder
7
7.0
Mar 4, 2021
03/21
by
J. Longbow (J_Longbow)
data
eye 7
favorite 0
comment 0
Designed the chest from Monster Hunter World to hold about 7 maybe 8 coasters like the ones designed by Ricktress I made 7 coasters from him and painted them after the different potions in MHW, but i wanted a nice thing to hold them in so i figured the chest would be appropriate. First thing ive uploaded to Thingiverse so hope people like it. Edit: Added alternative lid design. the "log" is separated for faster printing and less support made.
Topics: coaster, Monster_Hunter, Kitchen & Dining, thingiverse, coaster_holder, stl, drink_coaster
3
3.0
Jan 8, 2021
01/21
by
Ed Nail (bundy131)
data
eye 3
favorite 0
comment 0
Created a holder for the coaster created by M_Rozay: https://www.thingiverse.com/thing:2984609 File list contains original coaster and holder
Topics: Buckeyes, drink_coaster, stl, Decor, coaster_holder, coaster, thingiverse, Ohio_State
9
9.0
Apr 27, 2021
04/21
by
William Clampitt (WClampitt1)
data
eye 9
favorite 0
comment 0
This is a coaster holder I designed to hold 6 of the tree silhouette coasters made by Tosh. But, the .scad file can be edited to hold more coasters of different sizes. I know my coding isn't perfect, but I am fairly new to openSCAD so please feel free to leave any advice on how I can better improve my models. I hope you enjoy!
Topics: Household, thingiverse, storage, coaster_holder, coaster, drink_coaster, stl, drink, openscad
3
3.0
Jan 7, 2021
01/21
by
David Shearer (DPS_Design)
data
eye 3
favorite 0
comment 0
I thought I would add another drink coaster to my collection - this one with the iconic 2020 logo. Coaster is set up for a filament change at 2.75mm height I've added my three coaster caddy designs: Pictured grey - # 1 Green - # 2 Red - # 3
Topics: drink_coaster, stl, 2020, coaster_holder, Kitchen & Dining, thingiverse, Coaster_Caddy
4
4.0
Mar 15, 2021
03/21
by
Jan Kareta (karetaj)
data
eye 4
favorite 0
comment 0
This is box for coasters with 100mm diameters (Inside diameters is 102mm). Its designed fo 10 coasters. Easy and fast printing.
Topics: Kitchen & Dining, dispenser, thingiverse, coaster_holder, stl, coaster, box, drink_coaster
6
6.0
Mar 18, 2021
03/21
by
Daryl Jennings (Daryl_Maker_Lab)
data
eye 6
favorite 0
comment 0
Cubs Pedestal Coaster holder. Designed to hold 4 of the coasters designed by chiefrentageek. https://www.thingiverse.com/thing:822372
Topics: coasters, drink_coaster, stl, Organization, thingiverse, coaster, coaster_holder, beverage_coaster
2
2.0
Oct 29, 2021
10/21
by
SEAN ANDERSON (GreenLionGraphics)
data
eye 2
favorite 0
comment 0
This Coaster Holder is Designed to fit the coasters that I have designed including the three files attached. A set of 5 will stack just below the top of the holder, 6 coasters will stack just over the top of the holder. Follow my page for more Coaster Designs not included in this set. I strongly recommend printing with Amolen 30% Wood PLA filament for these items. It looks great!
Topics: thingiverse, coaster_holder, drink_coaster, Kitchen & Dining, stl, coaster_set, coaster
2
2.0
Jan 18, 2022
01/22
by
Aiden Beutlich (Zoomy51)
data
eye 2
favorite 0
comment 0
Streets of Rage Coaster I made for my uncle.
Topics: beverage_coaster, drink_coaster, Household, coaster_holder, thingiverse, coasters, stl, coaster
5
5.0
Mar 3, 2021
03/21
by
Kevin Stokes (Stokes_kevin23)
data
eye 5
favorite 0
comment 0
Coaster Holder. The 7 pointed star from Game of Thrones. Holds the GoT coasters designed by BlueFenix.
Topics: coaster, game_of_thrones, thingiverse, coaster_holder, stl, Interactive Art, drink_coaster
5
5.0
Mar 31, 2021
03/21
by
Jordan Bordage (Jordan_Bord)
data
eye 5
favorite 0
comment 0
the stand can hold 6 coaster enjoy your print
Topics: drink_coaster, coaster_holder, 3D Printing, thingiverse, human, skull, stl, coaster
10
10.0
Apr 30, 2021
04/21
by
Austin (MassiveLoaf)
data
eye 10
favorite 0
comment 0
A simple coaster holder. This should hold six 100mm x 6mm circular drink coasters. I don't have access to my 3D printer so if anyone prints one it would be cool to see how it looks. If there are any problems or if you have suggestions for improvement your comments are always welcome.
Topics: stl, table_coaster, coaster_holder, Household, drink_coaster, coasters, coaster, thingiverse
4
4.0
Mar 31, 2021
03/21
by
Perry deFaria (Raphael223)
data
eye 4
favorite 0
comment 0
I noticed a lack of dragon coasters on Thingiverse and this is my feeble attempt to correct that with a Public Domain dragon SVG and TinkerCad. I tried to find the SVG creator to give props, but couldn't.
Topics: drink_coaster, coaster_holder, thingiverse, beverage_coaster, Kitchen & Dining, stl, coaster
